Compare Models

Home › Sales › Compare Models

2021 Exmark Radius X-Series 60 in. Kawasaki FX730V 23.5 hp in Columbia City, Indiana — 2021 Exmark Radius X-Series 60 in. Kawasaki FX730V 23.5 hp

View Details

Specs
Features

General Information

Manufacturer

Exmark

Model Year

2021

Model

Radius X-Series 60 in. Kawasaki FX730V 23.5 hp

Model Code

RAX730GKA604A3

Color

Red

Body

Frame

Tractor - Unibody, welded, heavy-duty 2 X 3 in. rectangular tubular steel

Seat

Deluxe suspension (adjustable spring suspension) seat with high back, molded foam flip-up armrests, and integral safety switch

Rollover Protection (ROPS)

2-post foldable ROPS standard with seat belt and latch

Safety Features

Safety package - Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators

Drivetrain

Transmission/Drive

Hydro-Drive

Drive description - Dual Hydro Gear ZT3400, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters

Hydro-Drive

Drive description - Dual Hydro Gear ZT3400, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters

Number of Speeds

Infinitely variable speed selection

Travel Speed Forward

0 - 10.0 mph (16.1 kmph)

Travel Speed Reverse

0 - 6.0 mph (9.7 kmph)

Drive Tires

24 x 10.5-12 K500

Drive wheel release - Allows unit movement without engine running

24 x 10.5-12 K500

Drive wheel release - Allows unit movement without engine running

Tire Size

Casters - 0.375 in. thick caster yoke arms

Front caster tires - 13 x 6.5-6, smooth tread, pneumatic. Sealed taper roller bearings

Casters - 0.375 in. thick caster yoke arms

Front caster tires - 13 x 6.5-6, smooth tread, pneumatic. Sealed taper roller bearings

Parking Brake

Lever-actuated pawl brake

Electrical

Battery

12 V with 15 A alternator

Instrumentation

Fuel indicator - Translucent visual

Hour Meter

Engine

Engine Make

Kawasaki

Engine Model

FX730V, V-Twin Series

Gross Horsepower

23.5 hp @ 3,700 rpm engine speed

The gross horsepower of gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. The gross horsepower of the 3TNV80FT was laboratory rated at 2600 rpm; the 3TNV88C was laboratory rated at 3000 rpm by the engine manufacturer in accordance with SAE J1995. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.

23.5 hp @ 3,700 rpm engine speed

Displacement

726 cc

Fuel System

Carbureted

Air Cleaner

Cyclonic

Fuel Type

Gas carbureted

Fuel Capacity

7 gal. (26.5 l) single fuel tank with single fill location

Measurements

Length

81.7 in. (207.5 cm)

Width

64.6 in. (164.1 cm)

Height

70.4 in. (178.8 cm)

Weight

Curb - 957 lb.

Mowing Width

60 in.

Mowing Height Range

1.5 - 5.0 in. (3.8 - 12.7 cm)

Mowing Height Adjustments

0.25 in. (0.6 cm) increments, adjustable from operator's seat

Operational

Steering

Control - Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment

Deck Construction

10 ga. high strength alloy top that is formed and continuously seam welded, with 7 ga. side skirt

Deck style - Floating deck

Deck style description - Full-floating UltraCut Series 4

10 ga. high strength alloy top that is formed and continuously seam welded, with 7 ga. side skirt

Deck style - Floating deck

Deck style description - Full-floating UltraCut Series 4

Deck Lift

Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position

Discharge

Side discharge standard, with molded discharge chute and option to bag or mulch

Spindles

Blade - No maintenance, sealed and non-greasable spindles; 7.75 in. diameter cutter housing with 25 mm (0.98 in.) diameter spindle shaft and splined blade driver

Blades

3 at 20.50 in. length

Blade Tip Speed

Approximately 18,500 fpm

Power Take-Off (PTO)

Engagement - MagStop electromagnetic 125 ft. lb. clutch

Tractor Hitch

Tow hitch and jack receiver

Other

Includes

Cup holder

Warranty

Consumer / Commercial - 4-year or 1,000-hour limited

Features

ULTRACUT DECK TECHNOLOGY: Exmark’s exclusive UltraCut decks are featured on Radius models in a choice of 44- to 60-inch cut widths. Every UltraCut cutting deck features Exmark’s exclusive maintenance-free, sealed-bearing spindle assemblies for increased durability and reduced downtime, combined with zero maintenance.
HEAVY DUTY UNIBODY FRAME: Fully-welded using 2-inch by 3-inch frame tubes, the Radius frame design places major components including the engine, hydro drive and fuel tank lower, with better mass centralization. This gives the Radius increased hillside traction and stability, with heightened maneuverability.
QUICK ADJUSTABLE ROLLOVER PROTECTION SYSTEM (ROPS): Uses an easy-to-fold up-and-down design built from round tubes and provides flexibility for placement of accessories.
FUEL GAUGE WINDOW: Easy-to-use, accurate sight window-type fuel gauge is standard on all Radius models.
HEIGHT OF CUT MADE EASY: The patented height of cut system is a user friendly tool developed for operators to quickly and accurately select the height of cut.
COMFORT STEPPED UP: X-Series machines step up to Exmark’s full-suspension seating system, with three inches of adjustable vertical suspension combined with patented EVC stretch fabric to provide maximum operator isolation from bumps and vibration.
SERVICE MADE EASY: A tools-free removable foot rest eases access to the top-side of the cutting deck, and tool-less removable belt shields provide easier access to belts and spindles. A welded jack receiver on the Radius frame allows for easier service to the bottom-side of the deck when combined with the optional jack.

Features

ULTRACUT DECK TECHNOLOGY: Exmark’s exclusive UltraCut decks are featured on Radius models in a choice of 44- to 60-inch cut widths. Every UltraCut cutting deck features Exmark’s exclusive maintenance-free, sealed-bearing spindle assemblies for increased durability and reduced downtime, combined with zero maintenance.
HEAVY DUTY UNIBODY FRAME: Fully-welded using 2-inch by 3-inch frame tubes, the Radius frame design places major components including the engine, hydro drive and fuel tank lower, with better mass centralization. This gives the Radius increased hillside traction and stability, with heightened maneuverability.
QUICK ADJUSTABLE ROLLOVER PROTECTION SYSTEM (ROPS): Uses an easy-to-fold up-and-down design built from round tubes and provides flexibility for placement of accessories.
FUEL GAUGE WINDOW: Easy-to-use, accurate sight window-type fuel gauge is standard on all Radius models.
HEIGHT OF CUT MADE EASY: The patented height of cut system is a user friendly tool developed for operators to quickly and accurately select the height of cut.
COMFORT STEPPED UP: X-Series machines step up to Exmark’s full-suspension seating system, with three inches of adjustable vertical suspension combined with patented EVC stretch fabric to provide maximum operator isolation from bumps and vibration.
SERVICE MADE EASY: A tools-free removable foot rest eases access to the top-side of the cutting deck, and tool-less removable belt shields provide easier access to belts and spindles. A welded jack receiver on the Radius frame allows for easier service to the bottom-side of the deck when combined with the optional jack.

Compare Models

2021 Exmark Radius X-Series 60 in. Kawasaki FX730V 23.5 hp

2021 Exmark Radius X-Series 60 in. Kawasaki FX730V 23.5 hp

General Information

Body

Drivetrain

Electrical

Engine

Measurements

Operational

Other

Features

Features